Painting Booth Air Filter

ceiling filter roll for painting industrial primary filtration

Ceiling Filter Roll

synthetic filter media

with nice efficiency, remove fine dust & particle size ≥5μm; Application: for painting ventilation, air conditioning ventilation, heating ventilation primary filtration and so on;

Specification

Filter efficiency: F5/M5(EN779) EU5(EUROVENT)
Humidity: ≤99%RH
Final resistance: 400Pa
Average gravimetric: ≥95% (ASHRAE52.1-1992)
Temperature: ≤120°C
Fireproof level: F1(DIN 53438)、B1(GB/T 17591-2006)
Dust holding ability: 500g/square meter

Application

It is used in the spraying industry and the paint industry to filter paint mist to ensure that the surface of the material is clean and flawless. Primary air filtration of the ventilation system removes large particles of dust, reducing the burden on HEPA filters.

glass fiber filter

Very good for collecting painting oil particle, tell the air inlet side and air outlet side according to the color, air inlet side is white and outlet side is green. Frame can be galvanized steel, kraft paper and so on. High temperature resistance ability < 170°C is ok. Standard size can be offered and custom size available.

Specification

Average arrestance: 92-99%
Initial resistance: 15-20Pa
Final resistance: 250-280Pa
Air velocity: 0.7-1.75m/s
Dust holding ability: 3200g-4900g / square meter
Continuous temp resistance: 170°C
Filter media thickness: 50/60, 90mm
Size: standard and customized

Application

It is used in the spraying industry and the paint industry to filter paint mist to ensure that the surface of the material is clean and flawless. Primary air filtration of the ventilation system removes large particles of dust, reducing the burden on HEPA filters.

Multi-pocket design

Can remove fine dust and with very good dust holding ability. It is a wonderful filter for second filtration in painting industries. Multiply pocket design help increase the filter area and reduce resistance and enlarge dust holding capacity. The design is galvanized frame with 6 or 8 pocket installed. Size is 595*595*600mm or customized available.

Specification

Frame: aluminum alloy or galvanized steel
Filter media: synthetic fiber
Size: 595*595*600mm or customized
Initial resistance: 30-60Pa
Final resistance: 200-300Pa
Temperature: 80°C ( synthetic )
Temperature: 170°C ( glassfiber media )
Efficiency: M5, F6, F7, F8, F9 EN:779

Application

It is used in the spraying industry and the paint industry to filter paint mist to ensure that the surface of the material is clean and flawless. Primary air filtration of the ventilation system removes large particles of dust, reducing the burden on HEPA filters.

Heat resistance

In automotive final painting process, it is a oven tunnel to heating and drying the painting surface. In the process, dust control is also a very important part. Because the drying oven is high temperature design, some normal air filters cannot meet the requirement. High temperature Air Filter is a good choice, the efficiency is normally F7 or F8.

Specification

Frame: galvanized steel or SUS
Filter media: fine glass fiber
Separator: corrugated aluminum foil
Sealant: silicone
Gasket: silicone bar
Efficiency: F7 or F8 EN:779
Temperature resistance: 250°C

Application

It is used in the spraying industry and the paint industry to filter paint mist to ensure that the surface of the material is clean and flawless. Primary air filtration of the ventilation system removes large particles of dust, reducing the burden on HEPA filters.